Cookie policies
Products
Product Categories
Product Categories
- Bimetallic Stranded Wires expand_more
- Aluminum Stranded Conductors expand_more
- Ground Rods and Accessories for Grounding expand_more
- Terminals expand_more
- Splice Sleeves expand_more
- Pre-Insulated Terminals expand_more
- Connectors expand_more
- Clamps expand_more
- Tooling expand_more
Showing 108 out of 116 results
Exhibition:
Order by: Greater Relevance
expand_more
Purpose: Cable to busbar connections. Suitable for copper or COPPERSTEEL cables.
Characteristics: Tightening connection. Electrical conductivity and corrosion resistant. Single conductor version. Screw length suitable for plate / bar thickness up to 7mm.
Application: Grounding systems in general (power distribution systems, grounding grids, residential, building, industrial grounding, grounding in telecommunications networks).
Material: Bronze clamp, fittings in copper alloy or hot galvanized steel.
Application Tool: Spanner set or open-ended wrench.
*Also available tin plated.
Purpose: Cable to busbar connections. Suitable for copper or COPPERSTEEL cables.
Characteristics: Tightening connection. Electrical conductivity and corrosion resistant. Two conductors model. Screw length suitable for plate / bar thickness up to 7mm.
Application: Grounding systems in general (power distribution systems, grounding grids, residential, building, industrial grounding, grounding in telecommunications networks).
Material: Bronze clamp, fittings in copper alloy or hot galvanized steel.
Application Tool: Spanner set or open-ended wrench.
*Also available tin plated.
Purpose: Compressing copper terminals (tubular), pre-insulated or bare terminals, from 10 to 70 mm² (8 AWG to 2/0 MCM). Fast and safe pressing.
Characteristic: Mechanical plier, with three adjustable dies. Supplied with adjusting bolt for opening the die, which must be strictly in accordance with the ranges marked on the plate next to the die in order to avoid damaging the tool. The long handles reduce the necessary strength for compression, making the operator job easier.
Usage: Ideal for general industrial installation maintenances.
Raw material: Especial steel and anatomical cables with polypropylene handles.
Finishing: Superficial treatment against oxidation and corrosion.
Purpose: Used for driving sectional copperbonded ground rods (IHP).
Characteristics: High impact and shock resistance.
Application: Grounding of sectional copperbonded ground rod. The driving stud is attached to the coupling to prevent damage to the threads of the stud during ground rod driving.
Material: High mechanical resistance steel.
Finish: Black oxidation.
Purpose: For transformer bushings, allowing the connection of conventional aluminum or copper terminals.
Characteristics: High electrical conductivity and corrosion resistance. Pad with four holes NEMA standard, 10mm, 14mm or 20mm diameter pin options.
Application: Power distribution lines.
Material: Bronze.
Finish: Tin plated.
Purpose: Connection with CA, CAA aluminum cables. Enables ing of a hotline clamp.
Characteristics: Tightening connection. High electrical conductivity and corrosion resistance.
Application: Power distribution lines.
Material: Cast aluminum alloy body and stirrup in electrolytic copper.
Application Tool: Star or open ended wrench. Finishing (Stirrup): Tin plated.
Purpose: Termination on sectioning switches and busbars in conjunction with aluminum wedge connectors.
Characteristics: High electrical conductivity and corrosion resistance. Pad with two or four holes NEMA standard.
Application: Power distribution lines.
Material: Cast aluminum alloy.
Application Tool: Impact tool for wedge connector.
Suitable for overhead power distribution lines oflowurban tension, connection extensions, secondary rural power distribution lines, among other applications. The MULTIPLEXED conductors have PHASE aluminum alloy conductor 1350 (CA) and NEUTRAL available in aluminum alloy 6201 (CAL), aluminum alloy 1350 (CA) or aluminum alloy 1350 with aluminum core coated with aluminum (CAA/RA).
The insulation is composed of polyethylene (PE) or cross-linked polyethylene (XLPE) and can have its color and engraving customized on demand.
DUPLEX has one neutral and one insulated phase cable or one bare neutral and one isulated phase options.
Purpose: Cutting, stripping wires and cables and compressing all kinds of eyelet terminals, insulated or not from 0.75 to 25 mm² (22 AWG to 4 AWG).
Characteristic: Manual plier, with still dies and easy handling.
Usage: Ideal for maintenance in general industrial installations.
Raw material: Especial steel and anatomical cables with polypropylene handles.
Finishing: Superficial treatment against oxidation and corrosion.