Cookie policies
Products
Product Categories
Product Categories
- Bimetallic Stranded Wires expand_more
- Aluminum Stranded Conductors expand_more
- Ground Rods and Accessories for Grounding expand_more
- Terminals expand_more
- Splice Sleeves expand_more
- Pre-Insulated Terminals expand_more
- Connectors expand_more
- Clamps expand_more
- Tooling expand_more
Showing 126 out of 126 results
Exhibition:
Order by: Greater Relevance
expand_more
Purpose: Used for disconnecting switch terminals and fuse switches for temporary grounding.
Characteristics: High electrical conductivity and corrosion resistance. Pad with four holes NEMA standard.
Application: Power distribution lines.
Material: Cast aluminum alloy.
Purpose: Tap or splice (low traction) for COPPERSTEEL or copper cables. Suitable for copper to copper connection.
Characteristics: Tightening connection. High electrical conductivity and corrosion resistance.
Application: Power distribution network and grounding in general.
Material: Body in electrolytic copper. Nut and rider in copper alloy.
Application Tool: Box, open-ended or monkey wrenches.
Purpose: To crimp eyelet terminals, both insulated and non-insulated.
Suitable for terminals: Pre-insulated eyelet terminals: TI and TID.
Applicable Conductors: 0.5 to 6 mm² (22 – 10 AWG)
Purpose: Compressing all copper or aluminum connector types, terminals and lugs from up to 630 mm² (up to 1250 MCM) using appropriate die sets. Fast and safe pressing.
Characteristic: Hydraulic compressor, compressing strength 23 t/strength. Usable with G722H/G723H interchangeable dies, that must be acquired separately.
Suitable for: CAH, CAC, CAL, CAS, TAL, LAR, LEB, LCBF, TM, TF, LF, TCF, TBTA, TBD, TBPC, TBB, LB, CCO, SACC, SACG e SACGL.
Usage: Ideal for general industrial installation maintenances.
Raw material: Especial steel and anatomical cables with polypropylene handles.
Finishing: Superficial treatment against oxidation and corrosion.
Interchangable Die for Manual Pliers (AT-60)
Purpose: To crimp eyelet terminals, both insulated and non-insulated.
Suitable for terminals: Crimp eyelet terminals TI and TID (insulated and non-insulated)
Applicable Conductors: 6 to 25 mm² (10 – 4 AWG)
Purpose: The heads are specifically designed to facilitate handling in hard-to-reach areas when used together with a hydraulic pump and hose. They are intended for installing splice sleeves and connectors on conductors, using specific dies.
Suitable for terminals: CAH, CAC, CAL, TAL, LAR, LEB, LCBF, TM, TF, LF, TCF, TBTA, TBB, LB, CCO, SACC, SACG and SACGL.
Applicable Conductors: Up to 630 mm²
Note 1: The hydraulic compressor included in the CY-96 Kit can be used. By purchasing the CY-630 head, the application range is expanded.Note 2: Compatible with G-type dies. For IU and H-type dies, an adapter is required (sold separately).
Purpose: To crimp eyelet terminals, both insulated and non-insulated.
Suitable for terminals: Pre-insulated eyelet terminals: TI and TID.
Applicable Conductors: 25 to 50 mm² (4 – 1/0 AWG)
Purpose: The adapter for the CY-630 head enables the use of IU and H-type dies on connectors and terminals from 16 to 500 mm² for copper and 16 to 300 mm² for aluminum, it expanding the tool’s application range.
Suitable for terminals: CAH, CAC, CAL, TAL, LAR, LEB, LCBF, TM, TF, LF, TCF, TBTA, TBB, LB, CCO, SACC, SACG.
Applicable Conductors: 16 to 500 mm² copper and 16 to 300 mm² aluminum.
Note: Sold separately.